Table of Contents
Advertisement
6. Web Menu System
6.4.5.2 Set Call Charge Rate (Call Charge Screen)
To enter the Call Charge screen, open "Call Log" menu on the left [menu] panel and select "Call
Charge".
JUE-501/JUE-251 calculates the communication charge automatically from the list of "Rate for Unit"
when it is filed by user. The calculated charge is displayed in Call Log.
* This calculation is only a rough estimation based on user input.
* JRC does not take any responsibility for the correctness of the estimated charge.
* Settings for UDI, RDI and 256k Streaming are not displayed for JUE-251 because FB250 system
doesn't support these services.
* Only Admin users can change these settings.
Fig. 6.4.5.2 Call Charge Screen
Procedure of setting Call Charge
Step 1: Select the Currency from the pull down menu. The menu contains USD, EUR and JPY.
Step 2: Click the Set button located to the right side of the Currency.
Step 3: Enter the charge for at a rate per unit time (minute), size (Mbyte) and mail.
Step 4: Register the settings by clicking Set button below.
NOTE
Step 1
Step 2
Step 3
Step 4
6-26
Advertisement
Table of Contents
