Table of Contents
Advertisement
•
RPM or Pitch Feedback (%) (light green/red colors).
•
Numeric values per thruster RPM or Pitch Feedback (%).
•
An Icon per Thruster or Rudder showing the angle Set Point (°).
•
An Icon per Thruster or Rudder showing the angle feedback (°).
•
Numeric value for each Thruster or Rudder angle (°).
•
A check box to select / deselect the individual thrusters.
•
Thruster ready indication (Thruster ready and DP control selected).
•
Heading controller output.
•
Server status.
•
Operator station status (Which operator station in control; 1,2,3).
•
Operating mode (Joystick Manual, Joystick Auto, Auto Position, Auto Pilot, Tracking).
2.3.1.3 Heading Setting Section
The Heading Settings are displayed at the bottom of the MAP screen (Figure 24: Heading Setting Section on page
35).
Figure 24: Heading Setting Section
•
Heading Set point in degrees, parameter adjustable.
•
Decrease – and Increase + buttons.
•
Increase / Decrease step size, parameter adjustable.
•
Set current heading as heading Set Point.
•
Apply to confirm and execute the heading change request.
•
Cancel to keep existing heading Set Point.
2.3.1.4 Position Settings Section
The Position Settings are displayed at the bottom of the MAP screen (Figure 25: Position Settings section on page
36).
35 | Operation
Advertisement
Table of Contents
