Incoming Calls List; Flow Of Using Incoming Calls List - JRC JUE-501 Instruction Manual

Incoming Calls List

Example) To display 0081-422-45-9xxx with the Incoming Calls List, press ▼ button, and scroll
through the screen with ▲▼ buttons. Then place a call to the number by pressing
button.
Press ▼ button with the display on [Idle screen], the screen will change to [Incoming Calls List
screen]. [Incoming Calls List icon]
Press ▲▼ buttons until desired dial number is displayed. When the call was a missed call, it has *
mark at the beginning of the displayed number.
When there were some missed calls [missed call icon]
screen. The icon will continue to be displayed until the Incoming Calls List has been confirmed. (On
some screen of input mode, the missed call icon won't be displayed because input mode icon has a
priority over the missed call icon.)
APAC E143.5
14:03 UTC
READY
R
01
* 0 0 0 0 11 2 2
READY
R
26
*
0 0 8 1 4 2 2 4 5 9 5 1
CS PS READY
0 0 8 1 4 2 2 4 5 9 x
x x
HDST-VOICE
0 m 0 0 s
COMM(SND)
will appear at the upper part of the Handset screen.
R
Idle screen
Display Incoming Calls List pressing ▼ buttons.
Incoming Calls List
Select the desired dial number by pressing ▲▼ buttons,
and then press OK
of telephone number, press
Dial-up screen
Dial-up starts.
number is displayed.
On Communication screen
The line is connected.
Fig.5.1.3.2 Flow of using Incoming Calls List
5-9
5. How to use the Telephone/FAX
will appear at the upper part of the Handset
(when you want to display the beginning
# button 2 times).
When dial-up terminates, whole
OK