Printer Control Setting; Setting Print Output; Setting Print Mode - JRC JFE-380 Instruction Manual

4.6 Printer Control Setting

Note: JFE-380 electrically stores last 12or 24hours depth data. Optional printer runs after
only your PRINTER CONT menu PRINTER [ENT] pressing.
The following menu is displayed with [MENU] PRINTER CONT
PRINTER CONT
PRINTER
PRINT MODE
LOG BOOK PRINT
LOG LENGTH
SPEED
PRINTER MODEL SLECTION
The above-mentioned set content
is an initial value.

Setting Print Output

This item starts print function of optional printer.
Select "PRINTER" with

Setting Print Mode

This item selects print out mode by three items.
Select "PRINT MODE" with
Detail item
COPY
HITORY
LOG
Select the item by
Note: Please read a detailed explanation of the each print mode item with next page.
4. Operation 30
COPY
OFF
10min
4800bps
NKG-91
or key. Then press the [ENT] key to start print out.
or key. Then press
COPY/HISTORY/LOG
The item function is different according to the setting of
"COMMUNICATION > PRINTER PORT OUT" of the menu.
or key. Then press the [ENT] key.
.
A present selection item is displayed with a yellow
character.
To select items, use
Press or the [ENT] key after the item selection,
the detail setting will displayed.
Press the [ENT] key after the detail setting selection.
Then the settings would be registered and the menu
would return to previous screen.
To return to a previous screen without registering,
press or the [CLR] key.
or the [ENT] key to enter the detail setting.
(Refer to 4.7 communication setting.)
or key to choose.