Suspensions
•
Screw the top bolt on the headstock by
tightening it to the prescribed torque.
•
Tighten the screws fixing the fork
stems to the upper plate to the prescri-
bed torque.
•
Fit the handlebar.
•
Fit the fixing U-bolt.
•
Tighten the four screws of the fixing U-
bolt to the prescribed torque.
Rear
Removing the rear wheel
•
Place the vehicle on its rear service
stand.
•
Loosen and remove the nut on the
wheel axle.
•
Retrieve the thrust washer and the left
hand chain tensioner slider.
SUSP - 240
TUONO R_FACTORY