Maintenance That Must Be Performed Daily; Maintenance Of Ink Cartridges; Printing Tests And Normal Cleaning - Roland VersaUV LEF2-200 Regular Maintenance Manual

Maintenance That Must Be Performed Daily

Maintenance of Ink Cartridges

The precipitation of the ingredients in the ink disables printing in normal color. So that the ink mixes
well, shake the ink cartridge horizontally with a stroke length of around 5 cm (2 in.) from each end of
the ink cartridge.
• Remove the white ink cartridge, shake it 50 times (about 20 seconds), and then reinsert this car-
tridge.
• The ink cartridges for colors other than white do not need to be shaken before every operation,
but be sure to shake them when installing new ones.
The ingredients in white ink tend to settle. Each day, before starting the day's operations, be sure to
shake this cartridge. Allowing the ink to stand without carrying out these steps can cause the settled
material to harden, resulting in malfunction or other problems.
IM PO RTANT
• Before shaking the ink cartridge, wipe off any ink from around its mouth. If you do not wipe off
the ink, it may splatter when you shake the ink cartridge.
• When you have finished mixing the ink, reattach the ink cartridge immediately. Taking time to
reattach the ink cartridge will adversely affect the ink path.
• Even if you rarely use white ink, shake the white ink cartridge 50 times (about 20 seconds) once a
week.

Printing Tests and Normal Cleaning

Perform a printing test to ensure no dot drop-out or dot displacement occurs. If dot drop-out or dot
displacement occurs, clean the print heads (normal cleaning).
• Be sure to perform a printing test before daily operations to check whether normal cleaning is neces-
sary.
• If dot drop-out or dot displacement is present after refreshing the heads and performing a printing
test, perform normal cleaning.
1.
Set the machine so that the print area is set each time the media is set up.
Prevent printing in the incorrect position by specifying the print area each time before setting up the
object to be printed on.
ME M O
To print in the same position repeatedly, specify "DISABLE" for this setting.
Procedure
Press [MENU].
A
2.Regular Maintenance
19