Video Modes And Resolutions; Suse/Vesa Video Modes; Supported Video Resolutions Not Displaying - Raritan Dominion KX II User Manual

Video Modes and Resolutions

SUSE/VESA Video Modes

The SuSE X.org configuration tool SaX2 generates video modes using
modeline entries in the X.org configuration file. These video modes do
not correspond exactly with VESA video mode timing (even when a
VESA monitor is selected). The KX II, on the other hand, relies on exact
VESA mode timing for proper synchronization. This disparity can result in
black borders, missing sections of the picture, and noise.
To configure the SUSE video display:
1. The generated configuration file /etc/X11/xorg.conf includes a
Monitor section with an option named UseModes. For example,
UseModes "Modes[0]"
2. Either comment out this line (using #) or delete it completely.
3. Restart the X server.
With this change, the internal video mode timing from the X server will be
used and will correspond exactly with the VESA video mode timing,
resulting in the proper video display on the KX II.

Supported Video Resolutions Not Displaying

When using a CIM, there are some video resolutions, as listed in
Supported Video Resolutions
to you for selection by default.
To view all available video resolutions if they do not appear:
1. Plug the monitor in.
2. Next, unplug the monitor and plug in the CIM. All video resolutions
will not be available and can be used.
Appendix D: Informational Notes
(on page 294), that may not be available
321