Raritan Dominion KX II User Manual page 33

Chapter 2: Installation and Configuration
24
Sun Solaris Settings
To configure KVM target servers running Sun
1. Set the mouse acceleration value to exactly 1 and the threshold to
exactly 1. This can be performed from:

The graphical user interface.

The command line xset mouse a t where a is the acceleration
and t is the threshold.
2. All KVM target servers must be configured to one of the display
resolutions supported by the KX II. The most popular supported
resolutions for Sun machines are:
Display resolution
1600 x 1200
1280 x 1024
1152 x 864
1024 x 768
800 x 600
720 x 400
640 x 480
3. KVM target servers running the Solaris operating system must output
VGA video (H-and-V sync, not composite sync).
To change your Sun video card output from composite sync to
the nondefault VGA output:
1. Issue the Stop+A command to drop to bootprom mode.
2. Issue the following command to change the output resolution: setenv
output-device screen:r1024x768x70
3. Issue the boot command to reboot the server.
Vertical refresh rate
60 Hz
60,75,85 Hz
75 Hz
60,70,75,85 Hz
56,60,72,75,85 Hz
85 Hz
60,72,75,85 Hz
™ ™
Solaris :
Aspect ratio
4:3
5:4
4:3
4:3
4:3
9:5
4:3