Raritan Dominion KX II User Manual page 179

Chapter 8: Device Management
170
5. Assign a name to identify the server connected to that port. The
name can be up to 32 characters, and alphanumeric and special
characters are allowed.
6. In the Power Association section, associate a power strip with the
port, if needed.
7. In the Target Settings section, select 720x400 Compensation if you
are experiencing display issues when the target is using this
resolution.
8. Select 'Use international keyboard for scan code set 3' if connecting
to the target with a DCIM-PS2 and require the use of scan code set 3
with an international keyboard.
9. Click OK.