Raritan Dominion KX II User Manual page 307

Appendix B: Specifications
298
Target Server Requirements
When using smart card readers, the basic requirements for
interoperability at the target server are:

The IFD (smart card reader) Handler must be a standard USB CCID
device driver (comparable to the generic Microsoft
driver).

A D2CIM-DVUSB (Dual-VM CIM) is required and must be using
firmware version 3A6E or later.

Blade chassis server connections, where a CIM per blade is used,
are supported.

Blade chassis server connections, where a CIM per chassis is used,
is only supported for IBM
discovery enabled.
Windows XP Targets
Windows XP ® operating system targets must be running Windows XP
SP3 in order to use smart cards with the KX II. If you are working with
.NET 3.5 in a Windows XP environment on the target server, you must
be using SP1.
Linux Targets
If you are using a Linux
to use smart card readers with the Raritan device.

CCID Requirements
If the Raritan D2CIM-DVUSB VM/CCID is not recognized as a smart
card reader by your Linux target, you may need to update the CCID
driver version to 1.3.8 or above and update the driver configuration
file (Info.plist).
Operating system
RHEL 5
SuSE 11
®
Fedora Core 10
® ®
BladeCenter models H and E with auto-
® target, the following requirements must be met
CCID requirements
ccid-1.3.8-1.el5
pcsc-ccid-1.3.8-3.12
ccid-1.3.8-1.fc10.i386
®
USB CCID