Raritan Dominion KX II User Manual page 39

Chapter 2: Installation and Configuration
30
D. Local Access Port (Local Video Display, Keyboard and Mouse)
For convenient access to target servers while at the rack, use the KX II
Local Access port. While the Local Access port is required for installation
and setup, it is optional for subsequent use. The Local Access port also
provides a graphical user interface from the KX II Local Console for
administration and target server access.
The KX2-808, KX2-832 and KX2-864 also provide you with an Extended
Local port, labeled EXT LOCAL on the back of the device, for access to
target servers while at the rack. The Extended Local port is not required
for the initial installation and setup. It is not enabled by default and is
configured from the Local Console and the Remote Console. See
Configuring KX II Local Port Settings
information.
To connect the local port:

Attach a multi-sync VGA monitor, mouse, and keyboard to the
respective Local User ports using either a PS/2 or USB keyboard
and mouse (KX2-808, DKX2-832 and DKX2-864 provide USB only).
The physical connections for the Local User and Extended Local
ports can be found on the back panel of the KX II.
Connection Description
Monitor Attach a standard multi-sync VGA
monitor to the HD15 (female) video
port.
Keyboard Attach either a standard PS/2
keyboard to the Mini-DIN6 (female)
keyboard port, or a standard USB
keyboard to one of the USB Type A
(female) ports.
Mouse Attach either a standard PS/2 mouse
to the Mini-DIN6 (female) mouse port
or a standard USB mouse to one of
the USB Type A (female) ports.
Note: Future KX II models will provide USB ports and not PS/2 local
ports.
(on page 201) for additional