Step 2: Configure Network Firewall Settings - Raritan Dominion KX II User Manual

6. Select a resolution and refresh rate supported by the KX II. See
Supported Video Resolutions
Note: If you change the video resolution, you must log out of the target
server and log back in for the video settings to take effect.
Make UNIX Settings Permanent
Note: These steps may vary slightly depending on the type of UNIX
™
example, Solaris , IBM
1. Choose Style Manager > Startup. The Style Manager - Startup
dialog appears.
2. On the Logout Confirmation dialog, select the On option. This option
prompts you to save your current session when you log out.
Apple Macintosh Settings
For KVM target servers running an Apple Macintosh
the preferred method is to use the D2CIM-VUSB and Absolute Mouse
Synchronization.
Note: 'USB Profile 'Mac OS-X, version 10.4.9 and later' must be selected
from the USB Profile menu or the Port Configuration page.

Step 2: Configure Network Firewall Settings

To access KX II through a network firewall via Multi-Platform Client or
through the Port Access page, your firewall must allow communication
on TCP Port 5000 or another port that you designate.
To take advantage of the KX II:
Web-access capabilities
Automatic redirection of HTTP
requests to HTTPS
(so the more common
"http://xxx.xxx.xxx.xxx" can be
used instead of
"https://xxx.xxx.xxx.xxx")
See Network Settings
designating another discovery port.
Chapter 2: Installation and Configuration
(on page 294) for more information.
™
® AIX ) and the specific version in use.
The firewall must allow
inbound communication on:
Port 443 - standard TCP port for
HTTPS communication
Port 80 - standard TCP port for
HTTP communication
(on page 145) for additional information about
®
(for
® operating system,
27