Kx Ii Local Console Interface: Kx Ii Devices; Kx Ii Remote Console Interface; Launching The Kx Ii Remote Console - Raritan Dominion KX II User Manual

Chapter 3: Working with Target Servers

KX II Local Console Interface: KX II Devices

KX II Remote Console Interface

42
When you are located at the server rack, the KX II provides standard
KVM management and administration via the KX II Local Console. The
KX II Local Console provides a direct KVM (analog) connection to your
connected servers; the performance is exactly as if you were directly
connected to the server's keyboard, mouse, and video ports.
There are many similarities among the KX II Local Console and the KX II
Remote Console graphical user interfaces. Where there are differences,
they are noted in the help.
The KX II Local Console Factory Reset option is available in the KX II
Local Console but not the KX II Remote Console.
The KX II Remote Console is a browser-based graphical user interface
that allows you to log in to KVM target servers and serial targets
connected to the KX II and to remotely administer the KX II.
The KX II Remote Console provides a digital connection to your
connected KVM target servers. When you log into a KVM target server
using the KX II Remote Console, a Virtual KVM Client window opens.
There are many similarities among the KX II Local Console and the KX II
Remote Console graphical user interfaces, and where there are
differences, they are noted in the user manual. The following options are
available in the KX II Remote Console but not the KX II Local Console:

Virtual Media

Favorites

Backup/Restore

Firmware Upgrade

SSL Certificates

Audio

Launching the KX II Remote Console

Important: Regardless of the browser used, you must allow pop-
ups from the device's IP address to launch the KX II Remote
Console.