Raritan Dominion KX II User Manual page 35

Chapter 2: Installation and Configuration
26
2. Log out or restart computer.
Video Settings (GUI)
The GUI resolution can be checked and set using different commands
depending on the video card in use. Run these commands from the
command line.
Note: 1024x768x75 is used as an example here; substitute the resolution
and refresh rate you are using.
Card To check resolution:
32-bit # /usr/sbin/pgxconfig -prconf
64-bit # /usr/sbin/m64config -prconf
32-bit # /usr/sbin/fbconfig -prconf
and
64-bit
IBM AIX 5.3 Settings
Follow these steps to configure KVM target servers running IBM
5.3.
To configure the mouse:
1. Go to Launcher.
2. Choose Style Manager.
3. Click Mouse. The Style Manager - Mouse dialog appears.
4. Use the sliders to set the Mouse acceleration to 1.0 and Threshold to
1.0.
5. Click OK.
To configure the video:
1. From the Launcher, select Application Manager.
2. Select System_Admin.
3. Choose Smit > Devices > Graphic Displays > Select the Display
Resolution and Refresh Rate.
4. Select the video card in use.
5. Click List. A list of display modes is presented.
To change resolution:
1. # /usr/sbin/pgxconfig -res
1024x768x75
2. Log out or restart computer.
1. # /usr/sbin/m64config -res
1024x768x75
2. Log out or restart computer.
1. # /usr/sbin/fbconfig -res
1024x768x75
2. Log out or restart computer.
™
®
AIX