Raritan Dominion KX II User Manual page 190

Dell Blade Chassis Configuration
See Supported Blade Chassis Models
for Blade Chassis, and
Configurations (on page 196) for important, additional information when
configuring the blade chassis. See Dell Chassis Cable Lengths and
Video Resolutions for information on cable lengths and video resolutions
®
when using Dell chassis with the KX II.
To add a blade chassis:
1. Connect the blade chassis to the KX II. See
Equipment (on page 28) for details.
2. Select Device Settings > Port Configuration to open the Port
Configuration page.
3. On the Port Configuration page, click on the name of the blade
chassis you want to configure. The Port page will open.
4. Select the Blade Chassis radio button. The page will then display the
necessary fields to configure a blade chassis.
5. Select the Dell blade chassis model from the Blade Server Chassis
Model drop-down.
To configure a Dell PowerEdge M1000e:
1. If you selected Dell PowerEdge
available. Configure the blade chassis as applicable. Prior to
configuring a blade chassis that can be auto-discovered, it must be
configured to enable SSH connections on the designated port
number (see Device Services
account with the corresponding authentication credentials must be
previously created on the blade chassis.
a. Switch Hot Key Sequence - Select the hot key sequence that will
be used to switch from KVM to the blade server. The Switch Hot
Key Sequence must match the sequence used by the KVM
module in the blade chassis.
b. Maximum Number of Slots - The default maximum number of
slots available on the blade chassis is automatically entered.
c. Administrative Module Primary IP Address/Host Name - Enter
the primary IP address for the blade chassis. Required for auto-
discovery mode
d. Port Number - The default port number for the blade chassis is
22. Change the port number if applicable. Required for auto-
discovery mode
e. Username - Enter the username used to access the blade
chassis. Required for auto-discovery mode
(on page 192), Supported CIMs
Required and Recommended Blade Chassis
™
M1000e, auto-discovery is
(on page 150)). Additionally, a user
Chapter 8: Device Management
Step 3: Connect the
181