Raritan Dominion KX II User Manual page 211

Chapter 8: Device Management
202
Note: If you are using KX2-808, KX2-832 and KX2-864 as tiered
devices, you must connect them to the base KX II via the extended
local port.
4. If you are using the tiering feature, select the Enable Local Port
Device Tiering checkbox and enter the tiered secret word in the Tier
Secret field. In order to configure tiering, you must also configure the
base device on the Device Services page. See
Enabling Tiering
5. If needed, configure the Local Port Scan Mode settings. These
settings apply to Scan Settings feature, which is accessed from the
Port page. See Scanning Ports

In the "Display Interval (10-255 sec):" field, specify the number of
seconds you want the target that is in focus to display in the
center of the Port Scan window.

In the "Interval Between Ports (10 - 255 sec):" field, specify the
interval at which the device should pause between ports.
6. Choose the appropriate keyboard type from among the options in the
drop-down list. The browser will be restarted when this change is
made.

US

US/International

United Kingdom

French (France)

German (Germany)

JIS (Japanese Industry Standard)

Simplified Chinese

Traditional Chinese

Dubeolsik Hangul (Korean)

German (Switzerland)

Portuguese (Portugal)

Norwegian (Norway)

Swedish (Sweden)

Danish (Denmark)

Belgian (Belgium)
Note: Keyboard use for Chinese, Japanese, and Korean is for
display only. Local language input is not supported at this time for KX
II Local Console functions.
(on page 152) for more information on tiering.
(on page 50).
Configuring and