KX II Client Applications
Related Documentation
The KX II help is accompanied by the KX II Quick Setup Guide, which
can be found on the Raritan Firmware and Documentation page of
Raritan's website (http://www.raritan.com/support/firmware-and-
documentation).
Installation requirements and instructions for client applications used with
the KX II can be found in the KVM and Serial Access Clients Guide,
also found on the Raritan website. Where applicable, specific client
functions used with the KX II are included in the help.
The following client applications can be used in the KX II:
Product
Works with...
MPC
KX II (Generation 2)
KX II 2.2 (or later)
See the KVM and Serial Client Guide for additional information on the
client applications. Also see the
41) section of this guide, which contains information on using the clients
with the KX II.
Note: MPC and VKC require the Java
AKC is .NET based.
AKC
VKC
RSC
Working with Target Servers
™
Runtime Environment (JRE
Chapter 1: Introduction
RRC
(on page
™
).
5