Raritan Dominion KX II User Manual page 41

Chapter 2: Installation and Configuration
32
Changing the Default Password
The KX II ships with a default password. The first time you start the KX II
you are required to change that password.
To change the default password:
1. Once the unit has booted, enter the default username (admin) and
password (raritan). Click Login.
2. Enter the old password (raritan), enter a new password and then
enter the new password again. Passwords can be up to 64
characters in length and can consist of English, alphanumeric and
special characters. Click Apply. Click OK on the Confirmation page.
3. Note: The default password can also be changed from the Raritan
Multi-Platform Client (MPC).
Note: The default password can also be changed from the Raritan Multi-
Platform Client (MPC).
Assigning an IP Address
These procedures describe how to assign an IP address on the Network
Settings page. For complete information about all of the fields and the
operation of this page, see
To assign an IP address:
1. Choose Device Settings > Network. The Network Settings page
opens.
2. Specify a meaningful Device Name for your KX II device. Up to 32
alphanumeric characters using valid special characters and no
spaces.
3. In the IPv4 section, enter or select the appropriate IPv4-specific
network settings:
a. Enter the IP Address if needed. The default IP address is
192.168.0.192.
b. Enter the Subnet Mask. The default subnet mask is
255.255.255.0.
c. Enter the Default Gateway if None is selected from the IP Auto
Configuration drop-down.
d. Enter the Preferred DHCP Host Name if DHCP is selected from
the IP Auto Configuration drop-down.
e. Select the IP Auto Configuration. The following options are
available:
Network Settings (on page 145).