Raritan Dominion KX II User Manual page 170

4. Type the Agent Community String (the device's string). An SNMP
community is the group to which devices and management stations
running SNMP belong. It helps define where information is sent. The
community name is used to identify the group. The SNMP device or
agent may belong to more than one SNMP community.
5. Specify whether the community is Read-Only or Read/Write using
the Type drop-down list.
6. Configure up to five SNMP managers by specifying their Destination
IP/Hostname, Port # and Community.
7. Click the Click here to view the Dominion SNMP MIB link to access
the SNMP Management Information Base.
8. Click OK.
To configure the Syslog (enable Syslog forwarding):
1. Select Enable Syslog Forwarding to log the device's messages to a
remote Syslog server.
2. Type the IP Address/Hostname of your Syslog server in the IP
Address field.
3. Click OK.
Chapter 8: Device Management
161