Configuring Ports - Raritan Dominion KX II User Manual

Chapter 8: Device Management

Configuring Ports

168
Note: If either of these checkboxes is selected and power input is not
actually connected, the power LED at the front of the unit turns red.
To turn off the automatic detection:
 Deselect the checkbox for the appropriate power supply.
To reset to factory defaults:

Click Reset To Defaults.
Note: The KX II does NOT report power supply status to
CommandCenter. Dominion I (generation 1), however, does report
power supply status to CommandCenter.
The Port Configuration page displays a list of the KX II ports. Ports
connected to KVM target servers (blades and standard servers) and rack
PDUs (power strips) are displayed in blue and can be edited. For ports
with no CIM connected or with a blank CIM name, a default port name of
Dominion-KX2_Port# is assigned, where Port# is the number of the KX II
physical port.
When a port's status is down, Not Available is displayed as its status. A
port may be down when the port's CIM has removed or powered down.
Note: For blade chassis, the blade chassis name can be changed but its
blade slot names cannot be changed.
After you have renamed the port, use the Reset to Default function at
any time to return it to its default port name. When you reset a port name
to its default, any existing power associations are removed and, if the
port is a part of a port group, it is removed from the group.
To access a port configuration:
1. Choose Device Settings > Port Configuration. The Port Configuration
Page opens.
This page is initially displayed in port number order, but can be
sorted on any of the fields by clicking on the column heading.

Port Number - Numbered from 1 to the total number of ports
available for the KX II device.

Port Name - The name assigned to the port.
Alternatively, rename ports that are currently not connected to
the KX II via a CIM and, as such, have a status of Not Available.
To rename a port with a status of Not Available, do one of the
following: