Event Management; Configuring Event Management - Settings - Raritan Dominion KX II User Manual

Chapter 8: Device Management

Event Management

160
3. To adjust for daylight savings time, check the "Adjust for daylight
savings time" checkbox.
4. Choose the method you would like to use to set the date and time:

User Specified Time - Choose this option to input the date and
time manually. For the User Specified Time option, enter the
date and time. For the time, use the hh:mm format (using a 24-
hour clock).

Synchronize with NTP Server - Choose this option to synchronize
the date and time with the Network Time Protocol (NTP) Server.
5. For the Synchronize with NTP Server option:
a. Enter the IP address of the Primary Time server.
b. Enter the IP address of the Secondary Time server. Optional
Click OK.
The KX II Event Management feature allows you enable and disable the
distribution of system events to SNMP Managers, the Syslog and the
audit log. These events are categorized, and for each event you can
determine whether you want the event sent to one or several
destinations.

Configuring Event Management - Settings

SNMP Configuration
Simple Network Management Protocol (SNMP) is a protocol governing
network management and the monitoring of network devices and their
functions. The KX II offers SNMP Agent support through Event
Management.
To configure SNMP (enable SNMP logging):
1. Choose Device Settings > Event Management - Settings. The Event
Management - Settings page opens.
2. Select SNMP Logging Enabled. This enables the remaining SNMP
fields.
3. In the Name, Contact, and Location fields, type the SNMP agent's
name (that is, the device's name) as it appears in the KX II Console
interface, a contact name related to this device, and where the
Dominion device is physically located.