Raritan Dominion KX II User Manual page 230

Local device reset
mode
Enable Local Factory
Reset (default)
Enable Local Admin
Password Reset
Disable All Local
Resets
Note: When using the P2CIM-AUSBDUAL or P2CIM-APS2DUAL to
attach a target to two KX IIs, if Private access to the targets is required,
both KVM switches must have Private set as their PC Share Mode.
See Supported Paragon CIMS and Configurations
additional information on using Paragon CIMs with the KX II.
Checking Your Browser for AES Encryption
The KX II supports AES-256. If you do not know if your browser uses
AES, check with the browser manufacturer or navigate to the
https://www.fortify.net/sslcheck.html website using the browser with the
encryption method you want to check. This website detects your
browser's encryption method and displays a report.
Note: Internet Explorer
encryption.
AES 256 Prerequisites and Supported Configurations
AES 256-bit encryption is supported on the following web browsers only:

®
Firefox 2.0.0.x and 3.0.x (and later)

Internet Explorer 7 and 8
In addition to browser support, AES 256-bit encryption requires the
™
installation of Java Cryptography Extension
Jurisdiction Policy Files.
Jurisdiction files for various JREs
section of the following link:

JRE1.6 - http://java.sun.com/javase/downloads/index_jdk5.jsp
Description
Returns the KX II device to the factory defaults.
Resets the local administrator password only.
The password is reset to raritan.
No reset action is taken.
® 6 does not support AES 128 or 256-bit
®
are available at the "other downloads"
™
Chapter 9: Security Management
(on page 290) for
®
(JCE ) Unlimited Strength
221