You can also contact your Raritan representative to purchase a video
output adapter:
If you have:
Sun 13W3 with composite
sync output
Sun HD15 with composite
sync output
Sun HD15 with separate sync
output
Note: Some of the standard Sun background screens may not center
precisely on certain Sun servers with dark borders. Use another
background or place a light colored icon in the upper left hand corner.
Mouse Settings
To configure the mouse settings (Sun Solaris 10.1):
1. Choose Launcher. Application Manager - Desktop Controls opens.
2. Choose Mouse Style Manager. The Style Manager - Mouse dialog
appears.
3. Set the Acceleration slider to 1.0.
4. Set the Threshold slider to 1.0.
5. Click OK.
Accessing the Command Line
1. Right click.
2. Choose Tools > Terminal. A terminal window opens. (It is best to be
at the root to issue commands.)
Video Settings (POST)
Sun systems have two different resolution settings: a POST resolution
and a GUI resolution. Run these commands from the command line.
Note: 1024x768x75 is used as an example here; substitute the resolution
and refresh rate you are using.
To check current POST resolution:
Run the following command as the root: # eeprom output-
device
To change POST resolution:
1. Run # eeprom output-device=screen:r1024x768x75.
Chapter 2: Installation and Configuration
Use this video output adapter:
APSSUN II Guardian converter
1396C converter to convert from
HD15 to 13W3 and an APSSUN II
Guardian converter to support
composite sync
APKMSUN Guardian converter
25