Logging Out; Proxy Server Configuration For Use With Mpc, Vkc And Akc - Raritan Dominion KX II User Manual

Proxy Server Configuration for Use with MPC, VKC and AKC

4. Change the discovery Port (if necessary).
5. Select the Product Type.
6. Click OK. The device is added to your list of favorites.
To edit a favorite:
1. From the Favorites List page, select the checkbox next to the
appropriate KX II device.
2. Click Edit. The Edit page appears.
3. Update the fields as necessary:

Description

IP Address/Host Name - Type the IP address of the KX II device

Port (if necessary)

Product Type
4. Click OK.
To delete a favorite:
Important: Exercise caution in the removal of favorites. You are not
prompted to confirm their deletion.
1. Select the checkbox next to the appropriate KX II device.
2. Click Delete. The favorite is removed from your list of favorites.

Logging Out

To quit the KX II:

Click Logout in the upper right-hand corner of the page.
Note: Logging out also closes any open Virtual KVM Client and serial
client sessions.
When the use of a Proxy Server is required, a SOCKS proxy must also
be provided and configured on the remote client PC.
Note: If the installed proxy server is only capable of the HTTP proxy
protocol, you cannot connect.
To configure the SOCKS proxy:
1. On the client, select Control Panel > Internet Options.
Chapter 3: Working with Target Servers
55