Configuring Event Management - Destinations - Raritan Dominion KX II User Manual

Configuring Event Management - Destinations

System events, if enabled, can generate SNMP notification events
(traps), or can be logged to Syslog or Audit Log. Use the Event
Management - Destinations page to select the system events to track
and where to send this information.
Note: SNMP traps will be generated only if the SNMP Logging Enabled
option is selected. Syslog events will be generated only if the Enable
Syslog Forwarding option is selected. Both of these options are in the
Event Management - Settings page. See
Management - Settings (on page 160).
To select events and their destinations:
1. Choose Device Settings > Event Management - Destinations. The
Event Management - Destinations page opens.
System events are categorized by Device Operation, Device
Management, Security, User Activity, and User Group Administration.
2. Select the checkboxes for those event line items you want to enable
or disable, and where you want to send the information.
Tip: Enable or disable entire Categories by checking or clearing the
Category checkboxes, respectively.
3. Click OK.
Chapter 8: Device Management
Configuring Event
163