Changing A Usb Profile When Using A Smart Card Reader - Raritan Dominion KX II User Manual

Appendix D: Informational Notes

Changing a USB Profile when Using a Smart Card Reader

There may be certain circumstances under which you will need to
change the USB profile for a target server. For example, you may need
to change the connection speed to "Use Full Speed for Virtual Media
CIM" when the target has problems with the "High Speed USB"
connection speed.
When a profile is changed, you may receive a New Hardware Detected
message and be required to log in to the target with administrative
privileges to reinstall the USB driver. This is only likely to occur the first
few times the target sees the new settings for the USB device. Afterward,
the target will select the driver correctly.
Note: This feature is available with the KX II 2.4.0 (and later).
325