Name Command; Ipv6 Command - Raritan Dominion KX II User Manual

Chapter 12: Command Line Interface (CLI)
258

Name Command

The name command is used to configure the network name. The syntax
of the name is:
name [devicename <devicename>] [hostname <hostname>]
Device name configuration
devicename <devicename>
hostname <hostname>
only)
Name Command Example
The following command sets the network name:
Admin > Config > Network > name devicename My-KSX2

IPv6 Command

Use the IPv6_command to set IPv6 network parameters and retrieve
existing IPv6 parameters.
Device Name
Preferred host name (DHCP