View Options - Raritan Dominion KX II User Manual

Chapter 3: Working with Target Servers
82
b. Select Enable Scale Video to automatically scale the display on
the target server when it is accessed.
c. Select Pin Menu Toolbar if you want the toolbar to remain visible
on the target when it is in Full Screen mode. By default, while the
target is in Full Screen mode, the menu is only visible when you
hover your mouse along the top of the screen.
3. Click OK.
Scan Settings
The KX II provides a port scanning feature that searches for selected
targets and displays them in a slide show view, allowing you to monitor
up to 32 targets at one time. You can connect to targets or focus on a
specific target as needed. Scans can include standard targets, blade
servers, tiered Dominion devices, and KVM switch ports. See
Ports (on page 50). Use the Scan Settings tab to customize the scan
interval and default display options.
To set scan settings:
1. Click Tools > Options. The Options dialog appears.
2. Select the Scan Settings tab.
3. In the "Display Interval (10-255 sec):" field, specify the number of
seconds you want the target that is in focus to display in the center of
the Port Scan window.
4. In the "Interval Between Ports (10 - 255 sec):" field, specify the
interval at which the device should pause between ports.
5. In the Display section, change the default display options for the
thumbnail size and split orientation of the Port Scan window.
6. Click OK.

View Options

View Toolbar
You can use the Virtual KVM client with or without the toolbar display.
To toggle the display of the toolbar (on and off):

Choose View > View Toolbar.
Scanning