Raritan Dominion KX II User Manual page 202

Blade chassis Connection method
Generic If a D2CIM-VUSB or D2CIM-DVUSB is used
when connecting to a blade-chassis configured
as Generic, you will be able to select the USB
profiles from the Port Configuration page and
the client's USB Profile menu. However, virtual
media is not supported for generic blade
chassis and the Virtual Media menu is disabled
on the client.
Cisco ® UCS The Cisco KVM cable (N20-BKVM) enables
you to perform server blade administration,
configuration, and diagnostic procedures by
connecting video and USB devices directly to
the server blade.
Source: Cisco UCS 5108 Server Chassis
Installation Guide
™
®
Dell PowerEdge Includes one of the three KVM modules :
1855



These switches provide a custom connector
that allows two PS/2 and one video device to
be connected to the system.
Source: Dell PowerEdge 1855 User Guide
Dell PowerEdge One of two types of KVM modules may be
1955 installed:


Supported CIMs for Blade Chassis
The following CIMs are supported for blade chassis being managed
through the KX II:

DCIM-PS2

DCIM-USBG2

D2CIM-VUSB

D2CIM-DVUSB
Following is a table containing supported CIMs for each blade chassis
model that the KX II supports.
Analog KVM Ethernet switch module
(standard)
Digital Access KVM switch module
(optional)
KVM switch module (standard on systems
sold prior to April, 2005)
Analog KVM switch module
Digital Access KVM switch module
Chapter 8: Device Management
Recommended CIM(s)

DCIM-PS2

DCIM-USBG2

DCIM-USBG2

D2CIM-VUSB

D2CIM-DVUSB

DCIM-PS2

DCIM-PS2
193