Mounting Water Pump Cover; Installing Thermostat; Installing The Oil Filter - KTM 2008 690 SMC EU Repair Manual

30/ASSEMBLING THE ENGINE

Mounting water pump cover

19.26

Installing thermostat

19.27

Installing the oil filter

19.28
–
Push on the shaped washer
300014-11
–
Attach the water pump wheel
Guideline
Screw, water pump wheel
Loctite ® 243™
–
Lay on the water pump cover seal
300013-12
–
Put on the water pump cover
Guideline
Screw, water pump wheel
300012-12
–
Position the thermostat
The drill hole
–
Install the thermostat case
–
Mount and tighten the screws.
Guideline
Screw, thermostat housing
300010-11
–
Insert the oil filter
–
Lubricate the O-ring of the oil filter cover. Install the oil filter cover
–
Mount and tighten the screws.
Guideline
Screw, oil filter cover
300009-11
.

. Mount and tighten screw

M6
.

. Mount and tighten screws.

M6
with the gasket.

must face upward.

with the radiator hose.

M6
.

M5

10 Nm Loctite ® 243™
(7.4 lbf ft)
10 Nm Loctite ® 243™
(7.4 lbf ft)
10 Nm Loctite ® 243™
(7.4 lbf ft)
.

6 Nm (4.4 lbf ft)
144