Installing The Outer Clutch Cover; Mounting The Water Pump Cover; Installing The Kickstarter; Installing The Engine Sprocket - KTM 50 SX 2010 Repair Manual

30/ASSEMBLING THE ENGINE

Installing the outer clutch cover

17.13

Mounting the water pump cover

17.14

Installing the kickstarter

17.15

Installing the engine sprocket

17.16
–
Mount screw
Guideline
Screw, clutch cover
–
Mount the clutch cover gasket.
–
Position the outer clutch cover. Mount and tighten screws
Guideline
Screw, clutch cover
300482-10
–
Mount the gasket and dowels.
–
Position the water pump cover.
–
Mount and tighten screws
Guideline
Screw, water pump cover
300481-10
–
Position the kickstarter. Mount and tighten screw
Guideline
Screw, kickstarter
300480-10
–
Slide on the engine sprocket with the collar facing the engine. Mount lock ring
300479-10
and tighten all screws in a crisscross pattern.

.

M5
M6x50 10 Nm (7.4 lbf ft)
.

M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
.

6 Nm Loctite ®
(4.4 lbf ft)
87
243™
.
