Removing The Main Silencer - KTM 2008 690 SMC EU Repair Manual

05/EXHAUST

Removing the main silencer

8.3
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down. Do not touch hot components.
–
Position the spacer.
–
Position the manifold at the front with the seals.
–
Mount and tighten nuts
Guideline
Nut, manifold on cylinder
head
300208-11
–
Position the exhaust clamp.
–
Tighten screw
Guideline
Screw, exhaust clamp on
manifold
300209-12
–
Plug in the connector of the lambda sensor
binders.
300210-11
–
Position the heat shield.
–
Mount and tighten screws
Guideline
Screw, exhaust heat shield
–
Install the air filter box. (
300207-11
–
Remove screws
–
Take off the exhaust heat shield.
302044-10
.

M8
.

M8
.

M5
p. 52)
.

25 Nm Copper paste
(18.4 lbf ft)
25 Nm Copper paste
(18.4 lbf ft)
. Secure the cable with the cable

8 Nm (5.9 lbf ft)
48