KTM 2008 690 SMC EU Repair Manual page 95

30/ENGINE
–
Position the rear sprocket cover.
–
Mount and tighten screw
Guideline
Remaining screws, chassis
–
Mount and tighten screw
Guideline
Remaining screws, chassis
300213-11
–
Position the shift lever.
–
Mount and tighten screw
Guideline
Screw, shift lever
–
Mount and tighten screws
Guideline
Screw, radiator bracket
300212-11
–
Position the radiator hoses. Install the spring-loaded band-type clamps
–
Install the exhaust manifold. (
–
Disconnect the battery. (
300211-11
–
Remove the oil filler plug with O-ring
engine oil.
Engine oil
–
Install and tighten the oil filler plug with O-ring
–
Fill the cooling system. (
300802-10
–
Remove the motorcycle from the work stand. (
–
Take a short test ride.
–
Read out the fault memory using the KTM diagnostics tool.
–
Check the engine for leakage.
–
Check the engine oil level. (
–
Check the coolant level. (
.

M8
.

M6
.

M6 10 Nm
(7.4 lbf ft)
.

M6
p. 47)
p. 69)
from the clutch cover and fill up with

1.70 l (1.8 qt.) Engine oil (SAE 10W/60)
(00062010035) (
Alternative engine
oil
.

p. 149)
p. 10)
p. 152)
p. 151)
93
25 Nm
(18.4 lbf ft)
10 Nm (7.4 lbf ft)
Loctite ® 222
5 Nm (3.7 lbf ft)
.

p. 204)
Engine oil
(SAE 10W/50)
( p. 204)