30/ASSEMBLING THE ENGINE
Installing shift shaft
19.7
Installing starter drive
19.8
Installing primary gear
19.9
–
Release the locking lever.
–
Mount and tighten screw
Guideline
Screw, shift drum locating
300067-11
–
Slide shift shaft
–
Push sliding plate
the way.
–
Let the sliding plate engage in the shift drum locating.
–
Shift through the transmission.
300066-11
–
Install the two needle bearings
–
Push on the freewheel gear
300065-11
–
Push on the starter idler gear
–
Push on the needle bearing and torque limiter
300064-11
–
Ensure that the spring washer is seated properly.
–
Mount primary gear
Info
Turn the freewheel gear backwards and forwards to ease meshing.
300063-10
.
M6
with the washer into the bearing seat.
away from the shift drum locating
and the woodruff key
.
with washer. Mount lock ring.
.
10 Nm
Loctite
®
243™
(7.4 lbf ft)
. Insert the shift shaft all
.
with washer. Mount lock ring.
135