Installing The Rotor (125 Duke); Installing The Alternator Cover (125 Duke); Installing The Water Pump Cover; Duke) - KTM 125 Duke 2013 Repair Manual

16 ENGINE

16.5.19 Installing the rotor (125 Duke)

16.5.20 Installing the alternator cover (125 Duke)

16.5.21 Installing the water pump cover (125 Duke)
–
Lock the clutch basket and primary gear using special tool
Gear segment (90129081100) (
304756-10
–
Mount the spring washer.
–
Mount the rotor.
Info
Turn the freewheel gear counterclockwise to simplify assembly.
–
Mount and tighten screw
Guideline
Rotor screw
304757-10
–
Remove the special tool.
Gear segment (90129081100) (
–
Mount the dowels
–
Seal the cable guide.
Loctite ® 5910
–
Mount the alternator cover gasket
304755-11
–
Position the alternator cover.
–
Install the screws
Guideline
Screw, alternator cover
304754-11
–
Mount water pump impeller
–
Lock the clutch basket and primary gear using special tool
Gear segment (90129081100) (
–
Mount and tighten nut
Guideline
Nut, water pump impeller
304749-11
p. 279)
.
2
M10
p. 279)
.
1
.
2
and tighten them diagonally.
3
M6
.
1
p. 279)
with the washer.
3
M6
.
1
46 Nm Loctite ® 243™
(33.9 lbf ft)
12 Nm (8.9 lbf ft)
.
2
10 Nm Loctite ® 243™
(7.4 lbf ft)
185