04/SHOCK ABSORBER, SWINGARM
Installing the heim joint
7.17
–
Remove lock rings
200579-10
–
Place special tool
Pressing tool (T1207S) (
200580-10
–
Place special tool
using special tool
Pressing tool (T1206) (
Pressing tool (T129) (
200581-10
–
Mount lock rings
200579-11
–
Mount seal rings
Lubricant (T158) (
200578-11
–
Press in both collar sleeves
200582-10
on both sides.
underneath and press out the heim joint with special tool
p. 217)
underneath and press in the heim joint as far as the center
.
p. 217)
p. 218)
on both sides.
on both sides and grease them.
p. 206)
of the heim joint.
39
.