30/Disassembling The Engine; Clamping Engine Into Engine Work Stand; Draining The Engine Oil; Removing Starter Motor - KTM 2008 690 SMC EU Repair Manual

30/DISASSEMBLING THE ENGINE

Clamping engine into engine work stand

17.1

Draining the engine oil

17.2

Removing starter motor

17.3

Removing valve cover

17.4
–
Mount special tool
Engine work stand (61229001000) (
Support for engine work stand (75012001060) (
Holder for engine work stand (75012001070) (
–
Mount the engine on special tool
Info
Have an assistant help you or use a crane.
300144-10
–
Remove the oil drain plug
–
Remove plug
300002-10
–
Remove plug
–
Completely drain the engine oil.
300161-10
–
Remove screws
300001-01
–
Remove screws
300003-10
on engine work stand

p. 211)
.

with the magnet and seal ring.

with oil screen and the O-rings.

with oil screen and the O-rings.
 
. Take off the starter motor.

. Take off the valve cover with the valve cover seal.

.

p. 212)
p. 212)
94