04/SHOCK ABSORBER, SWINGARM
Servicing the shock absorber
7.11
Danger
Danger of accidents Disassembly of pressurized parts can lead to injury.
–
The shock absorber is filled with high density nitrogen. Adhere to the description provided.
–
Mount and tighten screw
Guideline
Screw, fuel tank, bottom
–
Repeat the operation on the opposite side.
300564-11
–
Lift the rear fairing.
–
Mount and tighten screws
Guideline
Screw, main silencer
holder on fuel tank
300563-11
–
Mount and tighten screws
Guideline
Screw, side cover
–
Mount the side cover. (
–
Remove the motorcycle from the work stand. (
300562-11
Condition
The shock absorber has been removed.
–
Remove the spring. (
–
Dismantle the damper. (
–
Disassemble the piston rod. (
–
Check the damper. (
–
Remove the heim joint. (
–
Install the heim joint. (
–
Assemble the piston rod. (
–
Assemble the damper. (
–
Install the spring. (
201239-01
.
M8
.
M8
25 Nm
(18.4 lbf ft)
.
M5
p. 55)
p. 10)
p. 35)
p. 35)
p. 36)
p. 37)
p. 38)
p. 39)
p. 40)
p. 41)
p. 45)
34
20 Nm
(14.8 lbf ft)
Loctite
®
243™
2 Nm (1.5 lbf ft)