04/SHOCK ABSORBER, SWINGARM
Assembling the damper
7.19
–
Assemble the piston rod. (
–
Position membrane
–
Mount and tighten membrane cover
–
Mount lock ring
300590-10
–
Push the spring and sleeve onto the compression damping adjuster. Attach the pis-
ton.
–
Mount and tighten the compression damping adjuster
Guideline
Compression damping adjustment
300588-11
–
Mount and tighten screw
Guideline
Filling port screw
300586-11
–
Fill the damper cartridge about half full.
Shock absorber oil (SAE 2,5) (50180342S1) (
300592-10
–
Grease O-ring
Lubricant (T158) (
–
Mount the piston rod carefully.
300593-10
–
Mount seal ring retainer
–
Mount lock ring
Info
Do not scratch the inner surface.
–
Pull out the piston rod so that the seal ring retainer rests against the lock ring.
300585-11
p. 40)
.
.
.
M26x1
.
M10x1
of the seal ring retainer.
p. 206)
and push it under the ring groove.
.
.
30 Nm
(22.1 lbf ft)
14 Nm
(10.3 lbf ft)
p. 205)
41