Installing Oil Pumps; Installing Locking Lever; Installing Shift Drum Locating - KTM 2008 690 SMC EU Repair Manual

30/ASSEMBLING THE ENGINE

Installing oil pumps

19.4

Installing locking lever

19.5

Installing shift drum locating

19.6
–
Install pins and internal rotors on both oil pump shafts.
–
Mount external rotors in the engine case.
The marking is not visible after mounting.
–
Mount the oil pump shafts
The marking
–
Oil the parts.
300073-10
–
Position both oil pump covers
Guideline
Screw, oil pump cover
–
Install washers
300071-11
–
Mount the oil pump gears
300070-11
–
Position locking lever
–
Mount and tighten screw
Guideline
Screw, locking lever
300069-11
–
Press locking lever
Info
The flat surfaces
300068-10
with internal rotors

is visible after mounting.

. Mount and tighten the screws.

M5
and pins .
 
, washers and lock washers
 
with sleeve and spring

.

M6
down and position shift drum locating.

of the shift drum locating are not symmetric.

.

6 Nm Loctite ® 243™
(4.4 lbf ft)
.

.

10 Nm Loctite ® 243™
(7.4 lbf ft)
134