Installing The Headlight Mask With The Headlight; Changing The Parking Light Bulb - KTM 2008 690 SMC EU Repair Manual

14/LIGHT SYSTEM, INSTRUMENTS

Installing the headlight mask with the headlight

15.9

Changing the parking light bulb

15.10
Note
Damage to reflector Reduced luminance.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
–
Connect the connectors of headlight
–
Check lighting function.
100294-11
–
Remove the cloth from the fender, attach the headlight mask to points
fender and swing it up to the steering head.
100295-10
–
Position groove
700543-01
–
Position brake-hose guide
Guideline
Remaining screws, chassis
100296-10
–
Remove the headlight mask with the headlight. (
–
Remove rubber cap
600610-12
and flasher lights

on counterpiece .
 
. Mount and tighten screws

M6
.

.

on the

.

10 Nm (7.4 lbf ft)
p. 84)
85