Ford 2002 Bantam Workshop Manual page 1583

501-20A-6
REMOVAL AND INSTALLATION (CONTINUED)
08/2001
Occupant Restraints — Active
4. Detach the cowl side trim panel.
5. Remove the cowl side trim panel.
6. Remove the front safety belt retractor.
Installation
1. To install, reverse the removal procedure.
• Using a suitable screwdriver remove the
four lower clips.
• Using a suitable screwdriver remove the
two front clips.
1. Remove the retaining bolt.
2. Lift the retractor to detach the locating
tang.
501-20A-6
2002 Bantam