Ford 2002 Bantam Workshop Manual page 1490

BACK TO CHAPTER INDEX
501-11-18
REMOVAL AND INSTALLATION (CONTINUED)
E6780 EN
Glass, Frames and Mechanisms
4.
NOTE: Some resistance may be encountered
when cutting through the glass locating pegs in
the top corners of the glass.
NOTE: Carefully remove the remaining part of
the locating pegs from the window opening
flange.
5. With the aid of another technician, use
FORD BANTAM
WARNING: Wear gloves and eye
protection when working with the
glass cutting tool as the cutting
operation may produce splinters.
When using the cutter wear ear
protectors. Failure to follow these
instructions may result in personal
injury.
CAUTION: Make sure the cutting blades
are changed where the cutting depth
changes to avoid damage to the body
and trim panels.
From inside the vehicle cut the PU
adhesive at the given maximum depths.
Use the recommended blades, following the
proprietary tool manufacturers instructions.
1. 25 mm.
2. 60 mm.
3. 70 mm.
suction cups to remove the rear window
glass.
08/2001 2002 Bantam
PAGES FROM MANUAL
TO MODEL INDEX
501-11-18
CONTINUED