Seatbelt Warning Lamp And Indicator Chime; Seatbelt Reminder - Ford Expedition 2020 Owner's Manual

E146191
Conditions of operation
The driver seatbelt is not buckled before
the ignition switch is turned to the on posi-
The driver seatbelt is buckled while the
warning lamp is illuminated and the indic-
ator chime is sounding...
The driver seatbelt is buckled before the
ignition switch is turned to the on position...

SEATBELT REMINDER

Front Seats
WARNING: The system will only
provide protection when you use the
seatbelt correctly.
This feature provides audio and visual
reminders for the front seatbelts.
Expedition (TB8) Canada/United States of America, enUSA, Edition date: 201907, Third-Printing-
Seatbelts
If
tion...
To adjust the shoulder belt height, squeeze
the button and slide the height adjuster up
or down. Release the button and pull down
on the height adjuster to make sure it is
locked in place.
SEATBELT WARNING LAMP
AND INDICATOR CHIME
This lamp illuminates and an
indicator chime will sound if the
driver seatbelt has not been
E71880
fastened when the vehicle's ignition is
turned on.
The seatbelt warning lamp illuminates and
the indicator chime sounds for a few
seconds.
The seatbelt warning lamp and indicator
chime turn off.
The seatbelt warning lamp and indicator
chime remain off.
This lamp illuminates and a
warning tone sounds if you do
not fasten your seatbelt when
E71880
you switch the ignition on. The lamp and
tone switch off when you fasten your
seatbelt or about one minute has elapsed.
When the initial warning expires for the
driver, more warnings are provided for the
driver and front outermost passenger. This
lamp illuminates and a warning tone
sounds if you or your front passenger do
not fasten the seatbelt buckle and the
vehicle speed exceeds 6 mph (9.7 km/h).
To deactivate the warning, see
Deactivating and Activating the
Belt-Minder Feature.
43
Then