Ford 2002 Bantam Workshop Manual page 1659

502-00-5
REMOVAL AND INSTALLATION (CONTINUED)
E6015 EN
Uni-Body, Subframe and Mounting Frame — General
Information
14. Remove the seven crossmember assembly
retaining bolts. (Support removed for
clarity).
15. Lower the crossmember assembly enough
to gain access to the power steering valve
body pipes.
16. Remove the pinion shaft to body seal.
17. CAUTION: Whenever the steering
gear unions are disconnected the
steering gear must be plugged to
prevent dirt ingress.
Disconnect the power steering pipes from
the steering gear valve body.
1. Disconnect the power steering pipes
• Allow the fluid to drain into a suitable
container.
2. Detach the power steering pipes from
the retaining bracket.
18. Remove the crossmember assembly.
502-00-5
08/2001 2002 Bantam