Ford 2002 Bantam Workshop Manual page 1504

501-11-32
GENERAL PROCEDURES (CONTINUED)
E899 EN
Glass, Frames and Mechanisms
5. Make sure the glass is inside the doorframe
6. Lower the glass to the bottom.
7. Standing inside the door, apply rearward
8. Tighten the window glass clamp retaining
9. Attach the door panel watershield.
10. Install the door trim panel. For additional
outer seal.
hand pressure on the outside of the window
glass, at the same time raising the glass to
its fully closed position.
screws.
information, refer to Section 501-05.
501-11-32
08/2001 2002 Bantam