Air Bag Control Module (33 650 0) - Ford 2002 Bantam Workshop Manual

501-20B-55
REMOVAL AND INSTALLATION

Air Bag Control Module (33 650 0)

08/2001
Occupant Restraints — Passive — Supplemental Air
Bag System
Removal
WARNING: To minimize the possibility of
premature deployment, wait at least one
minute after disconnecting the battery
ground cable before disconnecting any
supplemental restraint system electrical
connectors. Failure to follow this in-
struction may result in personal injury.
WARNING: To minimize the possibility of
premature deployment, do not use radio
key code savers when working on the
supplemental restraint system. Failure
to follow this instruction may result in
personal injury.
WARNING: To minimize the possibility of
injury in the event of premature de-
ployment, always carry a live air bag
module with the bag and trim pointed
away from the body. Failure to follow
this instruction may result in personal
injury.
WARNING: To minimize the possibility of
premature deployment, live air bag
modules must only be placed on work-
benches, which have been ground,
bonded. Failure to follow this instruc-
tion may result in personal injury.
WARNING: Never probe the electrical
connectors of air bag modules or any
other supplemental restraint system
component. Failure to follow the in-
struction may result in personal injury.
WARNING: Painting air bag module trim
covers could lead to deterioration of the
trim cover and air bag. Do not for any
reason attempt to paint discoloured or
damaged air bag module trim covers.
Install a new component. Failure to fol-
low this instruction may result in per-
sonal injury.
1. Disconnect the battery. For additional
information,
501-20B-55
refer to Section 414-01.
2002 Bantam