Fuji Xerox ApeosPort-V C5580 Administrator's Manual page 87

 Print Job 2
For PCL print drivers
- Calibrates the screen for the following combinations specified on the [Printing
Preferences] screen of the print driver.
Tab
Item
(1)
Combination
of Setting
(2)
For PostScript print drivers
- Calibrates the screen for the following combinations specified on the [Printing
Preferences] screen of the print driver.
Tab
Item
(1)
Combination
of Setting
(2)
Note • We recommend executing auto calibration for all four screen types. When the adjustment for one
screen type is complete, specify the next screen type and repeat the procedure.
• If color is not calibrated despite the periodic execution of auto calibration, contact our Customer
Support Center.
• Confirm the settings of the following items under [Tools] > [System Settings] > [Copy Service
Settings] > [Copy Defaults] in the System Administration mode before executing auto calibration:
- Lighten/Darken: Normal
- Contrast: Normal
- Sharpness: Normal
- Saturation: Normal
- Color Balance: 0, 0, 0
- Color Shift: Normal
• After finishing the auto calibration, change the settings of [Copy Defaults] if necessary. For
information on [Copy Defaults], refer to "Copy Defaults" (P.181).
The following describes how to perform calibration.
1
Select [Calibration] on the Services Home
screen.
If [Calibration] is not displayed, follow the
procedure below.
Advanced
Screen Image
Quality
Auto High Quality
Screening
Gradation High Quality
Screen Image
Quality
Auto High Quality
Screening
Gradation High Quality
Executing Calibration
Color Options
Image Image Types
Adjustment Mode
Basic Features Presentation (Only
graphic contents)
Any option Any option
Color Options
Basic Features/ Image Types
Advanced Features
Basic Features Presentation
Any option Any option
3
87