Ftp Client; Upnp Discovery; Port Number - Fuji Xerox ApeosPort-V C5580 Administrator's Manual

5 Tools

FTP Client

 Port Status
Select [Enabled] when you use the Scan to PC service with FTP transmission.
Note
Receive E-mail
 Port Status
Select [Enabled] when you receive e-mails and Internet faxes.
Send E-mail
 Port Status
Select [Enabled] when you send e-mails and Internet faxes.
E-mail Notification Service
 Port Status
Select [Enabled] when you use the E-mail Notification Service. The E-mail Notification
Service notifies you of the machine status or the completion of a print job, and a direct fax
5
job by e-mail.
Note
Important • To display the online help for CentreWare Internet Services, users need to have the environment to

UPnP Discovery

 Port Status
Select [Enabled] to use UPnP.
 Port Number
Enter a port number for UPnP communication from 1 to 65535.
The default value is 80.
Important • Do not use a number that is the same as a port number of another port. However, you can use the
WSD
Note
 WSD Print - Port Status
Select [Enabled] to use WSD Print.
Set this when you search a device on a network from Windows Vista
8, and Windows Server
194
• Select a communication mode to send data scanned via FTP from [Passive Mode] and [Active
Mode]. [Passive Mode] is selected by factory default. You can change the setting from CentreWare
Internet Services.
• [Consumables Status], [Parts Status], [Paper Tray Status], [Output Tray Status], [Jam Status],
[Interlock Status], and [Fault Notice] are notified as the machine status.
• You can configure the E-mail Notification Service in CentreWare Internet Services. For more
information, refer to the help of CentreWare Internet Services.
connect to the Internet. The communication fee shall be borne by you.
same port number for a port that uses HTTP (IPP, Internet Services (HTTP), UPnP Discovery, SOAP,
WebDAV, and Web Services on Devices (WSD)).
• WSD stands for Web Services on Devices.
®
2012.
®
, Windows 7, Windows