Fuji Xerox ApeosPort-V C5580 Administrator's Manual page 634

16 Appendix
Setting Item
Position
adjustment
Escape sequence
Form overlay
Stapling
Bypass Tray -
Wait User
16
Form Type
634
Item Number
61 Sets the action to be executed when a CR command is received.
(CR feature) [0] (Default) : Carriage return
[1]
15 Adjusts the printing position vertically or horizontally, and changes the
(Vertical positions of the margins.
position [0] (Default) : Off
adjustment) [1-500]
Important • Data outside the printable area is not printed regardless of the
16
(Horizontal
position
adjustment)
62 A normal extended command is specified starting with hexadecimal 1BH ESC
(Escape as the escape sequence identifying the command, followed by ; (3BH).
sequence) When you cannot use a semicolon or ESC code with the host computer, you
can use a special string instead as an escape sequence. This setting specifies
whether or not to enable the escape sequence replacement feature. When
enabling, specify the escape sequence with item 63.
[0] (Default) : Disabled
[1]
For more information on extended commands, contact our Customer
Support Center.
63 To control an extended command with a text code, you must specify an
(Escape escape sequence (the first two bytes) of the extended command.
sequence Enter two characters using the keyboard displayed on the screen.
character) [&%] (Default) : 0x21 - 0x7e
64 Constantly performs Form Overlay by selecting a form name (No. 01-64)
registered on the machine.
[0] (Default) : Off
[1-64]
Important • Since the default value is selected for this feature, this setting is not
66 Sets the stapling position.
[0] (Default) : Off
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
67 Sets whether to suspend the print processing when feeding paper from the
Bypass Tray. Processing is resumed by a user operation on the machine.
[0]
[1] (Default) : On
68 Sets the form type.
[0] (Default) : ESC/P-K
Value
: Carriage return and linefeed
: -250 to +250 mm
adjustment of the print position. In addition, data moved outside the
printable area as a result of adjusting the print position is not printed.
: Enabled
: No. 1 - No. 64
affected when an extended commend is received.
• Once a form name is selected, it continues to be displayed even if the
form is deleted. When a form name is selected using the up and down
arrow keys, it is not displayed. In this case, the setting is set to "Off".
: Top left
: Top Double
: Top Right
: Left Double
: Right Double
: Bottom Left
: Bottom Double
: Bottom Right
: Off